Back to top

रेक्टिफायर्स

हमारी कंपनी विशेषज्ञों द्वारा इंजीनियर और रेखांकित किए गए बेहतरीन उपकरण लाती है, जो इस क्षेत्र में ज्ञान और 30 वर्षों का अनुभव रखते हैं। पेश किए गए रेक्टिफायर एसी से डीसी की आपूर्ति करने के सबसे कुशल और किफायती तरीके हैं। हमारी कंपनी 500 वोल्ट और 30000 एम्पीयर से अधिक रेक्टिफायर का व्यापक दायरा बनाती है। इन प्रणालियों में हाइड्रोजनीकरण, इलेक्ट्रोप्लेटिंग, एनोडाइजिंग और कई अलग-अलग इलेक्ट्रोकेमिकल प्रक्रियाओं के लिए आदर्श क्षमता है। पूरी उत्पादन प्रक्रिया एक ही छत के नीचे होती है, जो प्रत्येक उत्पादन चरण में पूर्ण गुणवत्ता नियंत्रण की गारंटी देती है।

उत्कृष्टता के माध्यम से अर्थव्यवस्था और दक्षता में सुधार

कीमत 995000.0 आईएनआर/ टुकड़ा

MOQ : 10 टुकड़े

  • इनपुट वोल्टेज
  • अनुकूलित एम्पीयर (A)
  • उपयोग/अनुप्रयोग
  • Power Supply
  • एप्लीकेशन
  • औद्योगिक
  • प्रॉडक्ट टाइप
  • अन्य
  • फेज
  • Single
  • मटेरियल
  • GI
  • वारंटी
  • 5 वर्ष
  • विशेषताएँ
  • Durable
Technical Specifications Input Voltage: 380/440 Volts, 3phase, 50hz AC supply or any other voltage Output Voltage: Fixed Rated maximum DC voltage or variable from zero to maximum rated voltage Output Current: From Zero to Rated maximum DC current Temperature Rise: Designed for 30 -35 C rise above ambient at full load(against IEC std.of 45C) Efficiency: 12V Rectifier: 86-88% 24-50V Rectifier: 92-94% 100V Rectifier: 94% 200V Rectifier: 96% अधिक than 250V Rectifier: >97% Ripple Content: Less than 5%(optional feature of 1 to 1.5% Ripple Content also available) Insulation: A class for oil cooled

सिलिकॉन नियंत्रित इलेक्ट्रोप्लेटिंग रेक्टिफायर

कीमत 715000.0 आईएनआर/ टुकड़ा

MOQ : 10 टुकड़े

  • इनपुट वोल्टेज
  • अनुकूलित एम्पीयर (A)
  • उपयोग
  • अन्य
  • एप्लीकेशन
  • औद्योगिक
  • कंट्रोल सिस्टम
  • 0 से 1000 वी डीसी 30000 एम्पियर तक
  • डिसप्ले
  • एलसीडी
  • प्रॉडक्ट टाइप
  • सही करनेवाला
  • वारंटी
  • 5 वर्ष
ELECTROPLATING, CLEANING, ETCHING, STRIPPING, BARRELLING, ANODISING, HYDROGENATION AND OTHER ELECTROCHEMICAL PROCESS Roller Type Regulator Thyristorised Control 1.No wave form distortion at any load. Electrical wave form is like a moving wheel. For 50% Rated Voltage the Dia of wheel is reduced accordingly i.e. magnitude for a wave is decreased. 1.Wave form distortion. It is like cutting the wheel by 50 Percent and then moving the wheel i.e. wave form is cut as shown at full magnitude. 2.Higher power factor of more than 0.95 is achieved. 2.The power factor is lower between 0.5 to 0.9 3.The system is simple and can be repaired and maintained even by simple mechanic. 3.The system is specified and needs specially trained Electronic Engineer to repair and maintain. 4. The cost of spares is very negligible. 4. The cost of replacement is very high. 5. Over all losses are less. 5. Over all losses are more WHY THE REGULATOR CONTROL IS SUPERIOR TO THYRISTORISED CONTROL IN RECTIFIER